Tag Archives: Architecture

21 Log Cabin Builders Share Their #1 Tip For Building Log Homes

The following is an excerpt from Log Cabin Hub by Sarah Woods.

Lots of our fans have been writing us lately asking for the best piece of advice when it comes to building a log cabin home.  So we decided to go out and speak with 21 influential log cabin owners, builders, and manufacturers and asked them for their best tips, tricks, and secrets when it comes to building a log cabin.

Some of the 21 are authors and famous log cabin enthusiasts, and some are the world’s oldest log cabin manufacturing companies, but all of them have world-class experience and knowledge when it comes to building log cabins.

At Log Cabin Hub we asked them to reveal their number 1 piece of advice when it comes to building a log cabin for the first time.  Their responses are in, so here’s what you need to know before starting on your log cabin project!

1.  Design prudently.
John E. Schroeder, Schroeder Log Home Supply

1 John-E.-Schroeder-Log-Home-Tips-1

I would say the most important tip when building a log home is: design prudently. This encompasses: building large overhangs; building the first course of logs at least two feet above ground level; slope the grade away from the house; plan everything you can to keep the sun and the water off the house as much as possible.

These considerations early on will make the maintenance of the home a cinch. It’s when the home is exposed to too much sun that you have to re-stain/re-finish your home much more often.  And it’s when the home is exposed to too much moisture that you run into the eventual decay of wood. Plan to keep the sun and the moisture off your wood and your home will last forever.

John E. Schroeder owns Schroeder Log Home Supply, a hardware marketplace for log home supplies and tools.

2. Get the design right.
David S. Mann, Alta Log Homes

2 David-S-Mann-Log-Cabin-SecretsGetting the design right is important for the following reasons: It will help you get the house to work better on your land for energy efficiency and future maintenance, as well as make sure it can be built within your budget.

David S. Mann is the CEO of Alta Log Homes who have been building hand-made rustic log cabins since 1971.

 

3.  Build for your lifestyle.
Justin Metz, Brookridge Log & Custom Homes

3 Justin-Metz-Cabin-Builder-AdviceI believe the single most important tip when building a log cabin home is to build for your lifestyle. Log cabin living can be as unique as the lucky individuals that choose to embrace this style of home building. Whether its ultra rustic – with exposed beams, natural resources (like stone, wood and reclaimed timbers) or ultra contemporary with lots of fixed glass, metal and painted interiors, log home living is a lifestyle that brings a homeowner back to nature.

It is important to focus on the details of the home rather than the square footage. In the past, customers were focused on larger homes- typically above 2000 square feet, while the current trend is for smaller cabins that are well appointed with features that reflect the personalities of their inhabitants.

Justin Metz owns Brookridge Log & Custom Homes who are the authorized dealers of “The Original Lincoln Logs”.

4.  Know what you’re getting before making a decision.
Joe Folker, Timberhaven Log Homes

7 Joe-Folker-Log-CabinDon’t make your selection of a log home manufacturer based on price alone. Every log home company supplies a different level of completeness and quality standard. Know what you’re getting, via a detailed estimate/quote, before making your decision.

Joe Folker is the owner of Timberhaven Log Homes in Pennsylvania, who provide high-quality kiln-dried logs for your log home.

5. Look for integrity.
Hank Schaffeld, Gold Valley Log Homes

8 Gold-Valley-Log-Homes-AdviceThe most important thing that anyone can do when building a log home is to obtain their log home building material package from a company that has a high degree of integrity, who does all they promise from your initial conversation through the completion of your log home.

That means that the material they provide performs as claimed and they not only have the knowledge and personal experience to assist you with guidance beginning with your home design through the construction process and completion of your home, but are able to articulate that information in a way for you to make the right decision to have the home of your dreams.

Hank Schaffeld is founder of Gold Valley Log Homes who provide expert advice in the design and planning process for log cabin homes.

6.  Look for reputation, experience and respect.
Tod Parmeter, Golden Eagle Log Homes

9 Golden-Eagle-Log-Homes-adviceMy no. 1 tip is to work with a company that has a solid reputation, plenty of experience (so they are not practicing on your cabin) and treats the homeowner with respect from day one.

Tod Parmeter is the founder and owner of Golden Eagle Log Homes which has been building log homes since 1966.

7. Go with high quality materials.
Jeff Elliot, Coventry Log Homes, Inc.

Always go for the highest quality materials you can afford. It makes a huge difference in the life of the home and in the long run it will actually save money and time.

Jeff Elliot is the owner of Coventry Log Homes, Inc., a family run business specializing in high quality log cabin homes.

8.  Keep your logs dry!
Brett Youngstrom, Yellowstone Log Homes

4 Yellow-Stone-Homes-Log-Cabin-AdviceKeep your logs dry! I would suggest that you are certain you are getting dry logs for your home. 20% moisture content is considered green. Kiln dried logs are usually dried to 19%. 12% to 15% is better. With lower moisture content in the logs settling becomes a non-issue. Provisions like settling jacks can be eliminated from the structure with dry logs.

Long roof overhangs, covered decks, and proper landscaping should then be included into the design to keep water off from the logs after they are installed. Roof overhangs should be at least 3 feet. Sprinkler systems should be kept well away from the logs – a malfunctioning sprinkler head can spray logs and go undetected for months.

Based in Idaho, the Youngstrom family owns Yellowstone Log Homes (http://www.yellowstoneloghomes.com/) who, since 1962, have shipped over 10,000 log cabin kits around the world.

9.  Air-dried logs are superior to kiln dried logs.
Mark Long, Old Virginia Log Homes

5 Mark-Long-Log-Home-SecretsAir-dried logs are superior to kiln dried logs. When logs are air dried correctly, typically 6-8 months, they acclimatize to the atmosphere. Meaning the moisture content in the log evens out to what it would be like when it is used in a log structure. So you get minimal movement in the home and no need for adjustments on a regular basis. Yes, there will be pops and checking, but that is normal.

Kiln dried logs are just that, the logs are put into a kiln and dried. Once the logs are removed from the kiln and placed in the atmosphere they swell up with moisture. If they are cut and put into your home at this point, there will be issues as the logs acclimate and begin to shrink. This is why many companies are now selling maintenance packages.

Mark Long is a log cabin designer from Old Virginia Log Homes.

10. Log dryness is critical.
David Gordon, Katahdin Cedar Log Homes

11 David-Gordon-Timber-AdviceBefore starting the purchasing process talk with past customers and see what their total experience was. Visit a couple of homes from the companies that you are considering – make sure that these are independent of the corporation. Be sure to look over the completed product and see how much the logs have settled and shrunk over the first couple of years. Dryness of the logs provided in the package is probably the single most critical factor when selecting a company.

David Gordon is Chief Executive Officer at Maine’s largest white cedar mill – Katahdin Cedar Log Homes.

11.  Vertical wall shrinkage is a very important factor.
Jeff Jones, log cabin owner

The one thing I wish I’d considered before building my log home was the difference between manufactured logs or naturally harvested logs. Having now built three log homes, the vertical wall shrinkage is a very important factor, which isn’t really talked about. Sealing between manufactured logs is much easier. Also with naturally harvested logs chinking becomes more of a maintenance issue.

Jeff Jones is a log cabin owner in America.

12.  Purchase a quality log wall building system.
Dorie Workman, Appalachian Log Structures

The single most important advice for building a log home is purchasing a quality log wall building system. The log wall is what makes the home sustainable for many years, so it is imperative that the logs have been grade stamped, pressure treated for wood digesting insects and decay, and designed for settling.

Dorie Workman is Vice President of Appalachian Log Structures in West Virginia. (http://www.applog.com/)

13.  Find a reputable builder.
Ron Silliboy, Ward Cedar Log Homes

Cute log cabin in the mountains of Maggie Valley, North Carolina

We think the most important tip is to find a reputable builder. Finding a builder for your new log home can be an overwhelming task and is one of the most important decisions when building your new log home. Homeowners put a lot of time in researching their dream home they want to build and they should invest the time in finding a builder to assure their log home investment is built correctly.

Ron Silliboy is head of corporate sales at Ward Cedar Log Homes who are America’s first manufacturer of log cabins.

14. Know the true turnkey cost.
Drew Prochazka, Beaver Mountain Log & Cedar Homes

Don’t buy a log home package/kit without knowing the true turnkey cost and that you have the ability to fund the entire project. All too often we hear of people who bought from company X and can’t finish their home for what the company said it would cost. There are so many variables in building a home that the customer really needs to sit down with the log home producer and the builder together to get firm costs before buying a kit.

Drew Prochazka is a business manager for Beaver Mountain Log & Cedar Homes who build premium log homes.

15. You are building a home, not just a log shell.
Stephanie Johnson, Precision Craft Log & Timber Homes

First of all, there is no single tip that will magically make your project a success. Especially when you consider that every person has their own unique goals and building parameters. But I can say that after interacting with thousands of potential homebuilders over the last 25+ years, the most common bit of advice we could give is to remember that you are building a home, not just a log shell. Make sure that you keep this in mind through every stage. From determining realistic turnkey costs to setting building schedules. Make sure you account for everything and try to keep from making assumptions.

Stephanie Johnson is a marketing officer at PFB Custom Homes who are log cabin designers and builders.

16.  Protect your home from the elements.
Doug, log cabin owner

4 Doug-Log-CabinFor me, I would say that the #1 most important tip is properly protecting your home from the elements (Water/rain/snow, termites, everything else). Now, this is true for every home built in the world, sure. But, log homes and cabins can incur damage from these elements far easier than traditional housing.

Doug is a log cabin owner in Georgia – United States.

17. Maximize heat efficiency.
Taylor L. Applewhite, log cabin builder and owner

14 Taylor-Applewhite-Log-Cabin-AdviceIn the Rocky Mountains, find the perfect wood stove and build your cabin around it. The interior of your cabin should be dictated by how the heat will best work in that space to maximize efficiency.

Taylor L. Applewhite has built his own log cabin and has been featured in log cabin magazines and books.

 

18. Location, location, location.
Ruskee, log cabin owner

New small wooden house with sundeck, the walls of the yellow blockhouse, the roof covered with red metal tile

The most important thing is location, location, location! It took me many homes to figure that one out and it’s probably THE most important thing. Will my cabin face south? What’s the average temperature in the middle of winter? Is there a hill to block the winds? If there are high winds, where are the trees going to fall? How deep is the well-water? Like I said: location, location, location.

Ruskee is a log cabin owner in the United States.

19.  Be friendly to your neighbors!
Billy Rioux, Billy Rioux Adventurer

7 Billy-Rioux-Log-Home-AdventuresHaving built multiple log cabins my answer is to find the best spot to build your cabin! The sun facing east to west on the cabin is the best. Another one? Be friendly with your neighbors!

Billy Rioux is a log cabin owner in Canada and an enthusiast with a YouTube channel where he documents his adventures.

20. Pay attention to the details.
Janet Wilson, log cabin owner

The biggest mistake I made when building my cabin was to apply the caulk to seal the logs before applying the first coat of staining. As I used an oil based caulk the stain didn’t stick very well to it and it gave an unpleasant finish. My advice would be to always apply a first coat of stain before caulking or chinking your cabin the future.

Janet Wilson a log cabin enthusiast and owner in America.

21. Understand the topic.
Janet Woods, Log Cabin Hub

Ranger Station Cabin in the ForestThe most common piece of guidance I give to people when considering building a log cabin is to really understand the topic. Buy some books, watch some YouTube videos and read some blogs on log cabins to better your knowledge to make sure you avoid common mistakes. Once you are knowledgeable on log cabins then you have a much better chance of getting the design and build right!

Janet Woods is author of Log Cabin Hub, an online community to share log cabin advice and tips.


So that’s it! 21 log cabin owners, builders, and manufacturers have shared their best tips, tricks, and secrets for making your log cabin project a success.

We really hope you have found insights and tips that you can now use and apply when building your log cabin home.

Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter

Take look at the “world’s greenest office tower”

tower-pnc-plaza5

 

Tom Paladino’s company was on the design team for the Tower at PNC in Pittsburgh and he says the project changed his life.

The Tower at PNC in Pittsburgh is being billed as the greenest office tower in the world. It has a skin that breaths, a solar chimney, a park in the sky, wood-clad porch doors, indicators that tell you what the weather is outside, and something called The Beacon – an interactive light sculpture that broadcasts data about how much energy the building is using.

The tower is shifted on the podium and street grid for maximum sun exposure.  A double-walled “breathable” facade provides a thermal buffer while allowing air to pass through.

Operable Skin, The Tower at PNC

Operable Skin, PNC Tower

So what’s a solar chimney? It’s a vertical shaft with a rooftop solar collection panel that creates an updraft that draws cool outside air through the skin, across the floors, and up and out of the building, without requiring fans, for almost half the year.

A “living room” space links every two floors of the building, and a five-story indoor park offers views of downtown Pittsburgh.

The Park at The Tower at PNC

The Park at PNC Tower

Paladino acted as owner’s representative on sustainability and LEED management issues.  The 800,000-square-foot, 33-story building was designed by Gensler to reflect PNC’s commitment to green building, energy efficiency and innovation.

The design and systems will help reduce energy consumption by 50 percent and reduce water use by 77 percent compared with a typical office building, Paladino said.

“It was ridiculously simple, and at the same time,  a challenge in its aspiration,” said Tom Paladino in his blog post on the tower.

“LEED shifted from being the purpose of the green building program to being one of the desired results. We moved to a higher purpose, creating a headquarters that would serve PNC as another tool of the business.”

The building was designed to be “the most progressive workplace ever and to attract a highly social, digitally native, and an environmentally conscious work force,” Paladino said.

The Tower at PNC is built green for future generations to enjoy.

The tower cost $400 million.

ESI Design's Beacon at PNC Tower

ESI Design’s Beacon at PNC Tower

Outdoor space at PNC Tower

Outdoor space at PNC Tower

The Tower at PNC

The Tower at PNC

Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter

What would you do with the old floating bridge?

Sara Strouse, an architecture grad student in the WSU School of Design and Construction, has organized a design competition — there’s no contract at the end but the winner gets a $3,000 prize — to find creative ways to reuse waste material when the old SR 520 floating bridge comes down in 2014.

Photo by WSDOT

A press release from WSU about the competition said replacing the bridge is expected to create enough waste material to fill 67 Boeing 747s.

Strouse said as her final design project for school she wants to see if having a competition will get more people thinking about adaptive reuse — and get a little more attention for her thesis. She hopes to get between 50 and 100 ideas from design teams and individuals.

Submissions are due Aug. 15.

Strouse said she initially thought she would come up with ideas for reusing the bridge materials but she wanted to reach a broader audience and get an up-close look at how design competitions work so she decided to launch the contest. It has been a struggle to get sponsors and design the website herself, but it is giving her an opportunity to network with people and companies in the Seattle design community, where she eventually hopes to land a job.  She graduates in December.

Her father is a local architect, William Strouse of KSI Architecture and Planning.

The contest sponsors are NBBJ, KSI Architecture and Planning, WSU School of Design and Construction, and Kiewit/General/Manson, which is the bridge project contractor.

The new bridge is scheduled to open in 2014. After that, the old bridge will be removed.

Paul Hirzel of the School of Design and Construction said, “Infrastructure is of big interest in the U.S. right now, and encouraging the reuse of an existing structure versus demolition contributes to sustainability measures that are becoming more and more critical.”

The jury includes WSU graduate and architect Robert Hull.

For more information on the competition, see www.rethinkreuse.org. Winners will be announced by Peter Steinbrueck at the Seattle Design Festival Sept. 21. Winning entries will be displayed at the AIA Seattle Gallery from Sept. 18 through Oct. 26.

 

Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter

Roof going on at Bullitt Center

The following post is by Brad Kahn, president of Groundwork Strategies. He manages communications for the Bullitt Center project.

The roof of the Bullitt Center on East Madison Street is under construction now and all the structural elements are in place.

Skylights are being framed into the roof to maximize daylight and reduce the need for lighting.

Photo by Sky-Pix

Today President Rosen Plevneliev from Bulgaria, who is a former real estate developer, will tour the Bullitt Center as part of a trade mission to Seattle.

After campaigning for president on a platform that included energy efficiency in buildings, Plevneliev will be in Seattle today before heading to the NATO summit in Chicago next week. His visit to Seattle is focused on international trade and economic development. In particular, he is interested in learning about green building and clean energy technology, which is why he is touring Bullitt Center, the world’s greenest office building.

In the next few weeks, we will begin outreach to brokers to begin marketing office space inside the Bullitt Center. It will be marketed at rates comparable to new class-A space in downtown.

Photo by John Stamets

The HVAC system is going into the building, including the six-story composting toilet system.

McGivra Place, the park next door, now has a final design direction and the process is moving forward, with re-development expected later this summer or early fall. The park project is the first to pursue the Living Building Challenge for landscapes.

 

 

Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter

Get a glimpse of green ‘pod’ home

A compact, green-built “pod” home designed by Ann Raab of Greenpod Development of Port Townsend is open to the public at the GreenDepot site until April 29 from 10 am to 6 pm M-F, 10-5 on Saturday and 11-5 on Sunday. Workshops will be offered daily.

Outside Waterhaus

The pod was part of last weekend’s Green Home Tour sponsored by Northwest Ecobuilding Guild, featuring new and remodeled homes designed for low energy use and built with nontoxic materials.

Raab’s 450-square-foot pod is factory-built using all green products. It can be delivered to any city in Washington.

Greenpod’s Waterhaus model has a Kangen water system with adjustable pH for drinking and cleaning. It also has a waterfall and living wall.

Waterhaus kitchen

Ann Raab said pods are meant to be low maintenance dwellings that are environmentally safe, healthy for occupants and “a joy to live in.”

The Waterhaus model uses multi-use furnishings, color, lighting and windows to make the living space feel larger. The waterfall and living wall are sculpted from metal by industrial artist Ray Hammar of Sequim. Michael Hamilton of Port Hadlock made the tables and benches. Seth Rolland of Port Townsend created the bathroom vanity from rock and fir. Wall textures are applied by artist Gail Miller of Whidbey Island. The interior is decorated with an exclusive line of organic fabrics by Suzanne DeVall.

The pods are built by Greg Barron of Greenpod Builders.

Waterhaus living area

They are built to meet King County’s requirements for an accessory dwelling unit (ADU) and are aimed at people who want to downsize, age in place or care for family member in a separate unit. They also work as cabins, second homes, home offices and small commercial buildings. Pods can be stacked and configured to create communities. More information is at (800) 569-0831 or GreenPod.us.

 

Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter